A heavy storm brings with it the bad news of internal roof
leaks for houses with the least preparations and weak roofs. The repair and
maintenance of your roof are always neglected until you start noticing heavy
drops of water from it during a spell of heavy rain or a storm, but better late
than never!
Here we are going to discuss how to have a quick roof leak repair during storms through the following three, simple and easy steps.
Finding The Source
When dealing with any damage or inconvenience in your house
related to water, it is imperative to find the source before you think about
cutting it off. Finding the source of a roof leak during a heavy storm may not
be that difficult of a thing at all, if you have noticed your roof to leak
repeatedly, you can trace back the track of decolorized patterns. The traces of
the leak will always lead to the true source from where the water is making its
way into your house.
You can start by going to the attic and making thorough
inspections over there, or if you have a false ceiling installed in your house,
you can start by lifting the ceiling tiles to find out about the leaking point
on the roof. If you are still unable to identify the source of the leak, there
isn’t much you can do about cover it then and will have to wait until the
storm passes, so a local roofing contractor can come for inspection and repairs.
Always Have A Roofing Tar
This is step is only of significance once you have
identified the potential source for the leaking water from your roof. Whether
if it is somewhere in the attic, or somewhere above the tiles of the false
ceiling that you have now lifted, you need to get your roofing tar out once you
have made the discovery of the leak spot. You can also apply a roof leak spray
or roof leak sealant for quick and immediate results, but applying a roofing
tar will most definitely get the job done right away.
The roofing tar can also be applied directly over the leaking
area, but the best method to apply it would be getting a piece of plywood or
shingle and applying the roofing tar on one side. After you have evenly spread
the roofing tar on the piece of shingle or plywood, you just need to stick it
over the leaking area on your roof, and you will notice how instantly this
stops the water from leaking.
Cleaning The Area
Once you have successfully located and sealed the leak in
your roof, you now need to clean and dry up the affected area. Mopping the
floor is probably the quickest way to dry out the area, but if the water level
is over a foot in a room affected by leaks, using a hose to drain out the water
will be the best thing to consider.
If you are living in Norwich and need an emergency roof repair service, then hire the Point Roofing company in affordable rates.
Comments
Post a Comment